
Add to Cart
Picatinny Rail Mount Helmet HD-IP Camera
Introduction
The LKAV-5304 is a FHD IP H.265 rugged helmet mount camera with embedded encoder, which can connect directly to LinkAV IP mesh radio to transmit live video, it can draw power from the radio and does not require an external power supply. It is installed on the helmet using Picatinny Rail Mount adaptors. The camera can be mounted on the helmet or other equipment, as well as a vehicle, UAV, or a drone. The video is transmitted live using low bandwidth and/or recorded.
Features
■ Picatinny rail mount
■ Integrates with manpack mesh radio
■ 1920 x 1080p resolution
■ H.265/H.264/MJPEG video encoding
■ Supports dual stream encoded video.
■ Very low power consumption – 2W
■ Supports video streaming via multiple IP protocols
■ All parameters can be set using web browser/client.
■ Low light performance – 0.001 Lux (B&W) / 0.005 Lux (Color)
■ Low Weight
■ Use (IP67)
■ Custom Cables Available
Specification
Camera | |
Image Sensor | 1/2.8” Progressive Scan CMOS |
Mininum Lux | Color 0.005 Lux, B/W 0.001 Lux |
Digital Noise Reduction | 3D Digital noise reduction |
Wide Dynamic Range | 120dB |
Lens | 3.3MM MTV |
Field of View | 105°±5% |
Supplementary Light | 940nm 2W infrared light (1 unit) |
IR Light Switch | Press and hold for three seconds to turn the light-dependent resistor control on or off (when the light-dependent resistor control is off, the red light is off). |
Compression Standard | |
Video Compression | H.265/H.264 / MJPEG |
H.264 Encoding Type | Base Line Profile / Main Profile / High Profile |
H.265 Encoding Type | Main Profile |
Video Compression Bitrate | 32Kbps~8Mbps |
Audio Compression | G.711/G.726/PCM/AAC |
Audio Compression Bitrate | 64Kbps(G.711)/16Kbps(G.726)/16-64Kbps(AAC) |
Image | |
Max Resolution | 1920x1080 |
Main Stream Resolution and Frame Rate | 50Hz: 25fps 60Hz: 30fps (1920×1080,1280×960,1280×720) |
Third Stream Resolution and Frame Rate | Independent of the main stream settings, supports up to: 50Hz: 1fps (1920×1080) |
Backlight Compensation | Support |
Image Settings | Saturation, brightness, contrast, sharpness, AGC, and white balance can be adjusted via the client or browser. |
Day/Night Conversion Mode | Day, Night |
Network Parameters | |
Memory | EMMC memory, standard 16GB (supports up to 128GB) (local storage when disconnected from the network) |
Smart Features | Motion detection, tampering alarm, hard drive full, hard drive error, network cable disconnected, IP address conflict, unauthorized access |
Internet Protocol | TCP/IP, ICMP, HTTP, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, SMTP, SNMP, IGMP, 802.1XUDP |
Interface Protocol | ONVIF (PROFILE S, PROFILE G) |
Main Stream Address | rtsp://192.168.1.18/channel0/video=0,audio=0 Note: Please use the actual IP address |
Sub Stream Address | rtsp://192.168.1.18/channel0/video=1,audio=0 Note: Please use the actual IP address |
Interfaces | |
Communication Interface | 9-pin aviation interface |
Audio interface | Support (built-in) |
General | |
Working Temp | -25°C~60°C |
Working Humidity | <95% (No Condensing) |
Power Supply | DC12V ±20% |
Power Consumption | DC12V: 2W Max, Infrared Light on 3.8W Max |
IP Rating | IP67 |
Dimensions (mm) | 70x46x22 (w/o rail mount bracket) |
Weight (g) | 97g |
Interface Description
About LinkAV
Youtube | Official Website | LinkedIn | Facebook
Founded in 2005, LinkAV has been dedicating to design and manufacture mobile wireless video/data transmission systems including COFDM, IP MESH and 4G-LTE series, with a group of professional engineers to provide tailor-made service (OEM). LinkAV serves a diverse, high demanding customer base from police/ to ordinary citizens, from UAV to UGV/Robots, from oil field to forest, from overseas to mainland China.
LinkAV is a China leading manufacturer (OEM) of innovative wireless communications and information systems. Our advanced data link systems are ideal for critical communications in unmanned systems such as unmanned ground vehicles (UGVs), unmanned aerial vehicles (Drones, UAVs) and unmanned surface vehicles (USVs), and are designed with portability and reliability foremost in mind.
Our Advantages
■ Over 15 years experiences in wireless communication solutions.
■ High product quality, competitive price and low MOQ
■ Excellent pre-sale and after-sale technical team.
■ Quick response and fast delivery.
■ OEM supported.
FAQ
Q1: Are you a manufacturer or a trading company?
We're professional manufacturer specializing in wireless transmission systems.
Q2: Why should I choose you?
You'll get competitive price, prime quality, satisfied service and long warranty.
Q3: What kind of product service can I have?
OEM & ODM service.
Q4: What kind of warranty do you offer?
We offer one-year-warranty and lifelong maintenance.
Q5: What're the payment terms?
We accept bank transfer, PayPal, or cash payment.
Q6: Packaging & Shipping?
Neutral brown carton & Ship via DHL, FedEx, UPS, TNT or by air/sea.
Q7: How long for delivery?
1-3 weeks for regular model and 3-5 weeks for customized model.
Q8: Can I order 1 sample for test?
Yes, we welcome sample order, mixed samples are acceptable.
Q9: Do you have any MOQ limit?
No limit, 1pc is acceptable.
Q10: Is it OK to print my logo on the product?
Yes, please inform us formally before production and confirm the design firstly